Semi-Automatic Cable Coil Winding & Bundling Machine — SA-T30 / T35 / T40
Three models | Tie Ø5–65 mm | Coil Ø50–230 mm | 80 W
Set the turns and tie length on the screen, step on the pedal twice — one coil wound, tied and counted.
Coiling by Hand Is Slow and Inconsistent
Coils come out different sizes depending on who is doing it. This machine takes the judgement out: winding speed, number of turns and tie wire length are all set on the English touch screen, and the tie is fed automatically.
Operation is two pedal presses — one to wind, one to tie. The machine handles both round and figure-eight coils, and counts output as it goes. One operator can keep coiling while doing something else between cycles.
Built for This Job
- ✓Automatic sensing tie — no manual knotting
- ✓Winding speed, turns and tie length set on screen (30 speed options, 1–999 turns)
- ✓Both round and figure-eight coil shapes
- ✓Automatic output counting
- ✓Automatic tie wire feeding
- ✓English touch screen, foot-pedal operation
- ✓Three models to cover Ø5–65 mm tie diameter
Technical Specifications
| Model & tying diameter | SA-T30: Ø5–35 mm; SA-T35: Ø10–45 mm; SA-T40: Ø25–65 mm |
| Winding length | 50–200 mm (T30/T35); 50–230 mm (T40), adjustable |
| Cable tie length | 60–140 mm (T30); 90–200 mm (T35); 130–260 mm (T40) |
| Winding speed | 30 options, settable |
| Number of windings | 1–999 cycles |
| Power | 80 W |
| Size | 55 × 56 × 47 cm |
| Weight | 39 kg |
Specs above are for the standard configuration. Voltage, tooling and options can be customized — tell us your requirement before ordering.
Questions Buyers Ask About This Machine
Which model do I need?
Match the tying diameter to your finished coil: T30 for Ø5–35 mm, T35 for Ø10–45 mm, T40 for Ø25–65 mm. If your product sits near a boundary, go one size up.
Can it do figure-eight coils?
Yes, both round and figure-eight shapes, set per job rather than by changing parts.
Can one operator run several machines?
In practice yes. The cycle runs on its own after the pedal press, so one person can tend two or three units on light cable.
Machines Buyers Compare
Get a Quote for the SA-T30 Series
Send your wire list and terminal part numbers. You will get a spec’d quote with tooling and shipping cost — usually within 24 hours.
Tell us three things:
- Wire range (e.g. 0.75, 1.0, 1.5 mm²)
- Terminal type or part number
- Target output per day